Atlantik V2 just how to connect with the Wi Fi Router or Control one or more light without router;

Atlantik V2 just how to connect with the Wi Fi Router or Control one or more light without router;

Atlantik V2 just how to hook up to the Wi Fi Router or Control one or more light without router;

for connecting the Atlantik V2.X to your property Wi Fi router you have to stick to the 11 actions.

1. Turn fully off all units.

2. Switch on just the very first device you will connect.

3. In your tablet pick the wifi-socket.

4. Start Chrome from your own type and tablet 192.168.1.100 within the target club.

5. Username admin password 000000

6. Change mode to Sat.

7. Place your community SSID and password. ( Encryption constantly Disable : ( the system believe it is automaticly )

9. Head to system within the primary menu, and then click restart matchocean discount code.

10. Head to wifi establishing once more and alter to your system router SSID.

11. get the Orphek application and do search id, it should discover the very first product.

Then do from 1 to 11 when it comes to units that are remaining.

7. SSID : Put your Router Wi-Fi Network Name ( SSID Name ).

Into the SSID field you will key in your system name. This can be situation painful and sensitive therefore make sure to utilize money or tiny letters so its proper. Within the encryption key box: key in your Wi-Fi network password if have actually . ( Encryption constantly Disable : ( the system believe it is automaticly )

Select /Keep ,disable into the encryption field (try not to confuse with encryption key package). Your tablet will automatically discover the encryption key in case your router supports it.

9. Within the top left for the UART display you will definitely a range of fundamental, Advanced, and System.

Click system TAB plus in the section that is first of web page you will observe a restart switch. Press the restart key. a screen look saying the browser cannot hook up to the ip. That is fine as you should have to hook up to your router SSID.

10. On the tablet /Phone hook up to your wi-fi Router network SSID.

11.Open the Orphek application and then click the clear key regarding the upper right regarding the display screen. Now click on the search key situated on the top left of this display screen. Your system should discover the tablet as well as your brand new internet protocol address for your Orphek light should appear.

Perform actions 1 to 11 when it comes to staying Orphek devices.

* choice : you’ll set the internet protocol address fixed , for better connection

You will then check out:

A. Unchecked The Enable DHCP

B. Enter a static internet protocol address that belongs to your residence router. As an example:

Should your router is 100.168.20.1, you’ll be able to enter 100.168.20.2 or any internet protocol address between .2 and .254.

the internet protocol address should be unique or even it will probably result in an internet protocol address conflict

C. It’s also advisable to enter the submask plus in many cases it’s 255.255.255.0.

D. Go into the Gateway Address : it should be your Router internet protocol address

E. Then perform some exact same towards the staying devices. BUT etch unit will need to have unique ip .

instance:

When your Home Router set:

ssid: house

password : 12345678

IP 192.168.100.1

submusk 255.255.255.0

you then should set device 1

1.work type: Sta

2.SSID: house

3.Encryption Disable : ( the system believe it is automaticly )

4.Encryption key: 12345678

5.then click Save

6. Unchecked The Enable DHCP

7. set : internet protocol address: 192.168.100.10

8. set :submusk: 255.255.255.0

9. set Gateway Address 192.168.100.1

11. Head to system within the menu that is main and then click restart.

12. get the Orphek software and do search id, it will discover the unit that is first.

then you definitely should set unit 2 –

OBS: First turn OFF product 1 (therefore be no any internet protocol address conflict )

1.work type: Sta

2.SSID: house

3.Encryption Disable : ( the system think it is automaticly )

4.Encryption key: 12345678

5.then click Save

6. Unchecked The Enable DHCP

7. set : internet protocol address: 192.168.100. 11

8. set :submusk: 255.255.255.0

9. set Gateway Address 192.168.100.1

11. Head to system when you look at the primary menu, and then click restart.

12. get the Orphek application and do search id, it will find product 2 .

Оставить комментарий